33 'Pre amplifier' For Sale in Philippines
Save this search
Description
- Model: xDuoo MT-603 Tube Pre-Amp - Tube: Equipped with 12AU7 tube for warm audio - Inputs: Multiple choice selector for AUX1, AUX2, AUX3, and AUX4 - Design: Compact grey metal housing with top ventilation grille and front toggle power switch - Inclusions: Original box and custom foam packaging included - Condition: Well-maintained and ready to ship

allanpauco
6 years ago
Description
Mini Vacuum Tube Preamp Audio Hi-Fi Stereo Pre-Amplifier Treble Bass Control Brand new units available on hand Available for pick-up or shipping courtesy of buyer Adopt 6J1 tube, the main filter capacitor is 1000UF/25V, and the coupling capacitor is 1UF. The resistor uses a five-ring 1% metal resistor to ensure a good signal-to-noise ratio. The PCB adopts 1.6mm thick double-sided sheet, 2.0 oz copper thickness, and the whole process of tin-spraying ensures the good passing performance of the curren
Description
- Elevate your audio with the AIYIMA T1 PRO tube pre-amplifier. - Seamlessly stream music via Bluetooth 5.1. - Versatile connectivity with RCA and AUX inputs. - Fine-tune your sound with adjustable tone and bass controls. - Enhance your existing audio setup for a richer listening experience. - Includes original packaging for a complete package.

svami
4 years ago
Description
Open for swapping with a MacBook, etc. Bowers & Wilkins DM602 S3 loudspeakers (S/N: 0162917 & 0162918), a pair of matching speaker stands, a Technics SU-2980 pre/power amplifier (S/N: FL8817A515) and a Technics ST-500 radio tuner (S/N: PA6725A433). Amplifier Specifications: Power output: 85 watts per channel into 8Ω (stereo) - one source states 110/120W. Frequency response: 10Hz to 60kHz Total harmonic distortion: 0.09% Damping factor: 35 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to n
Description
Meetup McDonald's Madison Ortigas San Juan well regarded vintage integrated amplifier built-in phono pre amp MM/MC super powerful 8 ohms to 4 ohms sustained high current 60-95 watts 100V voltage JDM small consumption only 160 watts 3 way speaker binding post all working balance, bass, treble, subsonic filter, pure direct mode (audiophile listening) loudness, speaker A B presentable look
Description
◇Good Condition◇ While there are minor scratches and slight signs of use and age, the overall impression is good. ◆Appearance◆ There are some minor scratches and dirt, but the appearance is generally good. ◆Operation◆ Power-on, sound output, and basic functions have been confirmed. ◆Weight◆ ・Approx. 465mm x Approx. 150mm x Approx. 409mm ・Approx. 19.2kg 🇯🇵 Interested in this item? Feel free to message us for more details. 🏷️ Product Code: A-41 🛍️ More Similar Products Available 📂 Catalog C

letao_shopping_ph
26 days ago
Description
Product Description ■ Manufacturer: Marantz ■ Model Number: Model 7k ■ External Dimensions: W455 x H180 x D270 mm ■ Weight: 8.1 kg *Please note that there may be slight discrepancies as these measurements were taken in-house. Vacuum Tubes Used GE 12AX7A x 4 Telefunken ECC83 x 2 (with diamond mark) [Product Condition: Verified by Our Shop] Basic operation confirmed. 🇯🇵 Interested in this item? Feel free to message us for more details. 🏷️ Product Code: A-140 🛍️ More Similar Products Ava
Description
- Marantz PM6100SA amplifier - Includes original box, remote control, and power cable - Multiple input and output ports - Speaker terminals and pre-out - Made in Japan - Version 2 model - Silver finish New Arrival...Fresh From Japan... Marantz PM6100SA Ver. 2, Integrated Amplifier, in Excellent Working Condition Like New with Remote Control and Original Box, With Phono Input for Your Turntable Impedance 4-8 Ohms 70 watts + 70 watts into 4 Ohms 60 watts + 60 watts into 6 Ohms 50 watts + 50 watts in

letao_shopping_ph
24 days ago
Description
Product Description ■ Manufacturer: UESUGI ■ Model Number: U-BROS-280 ■ External Dimensions: W435 x H140 x D360 mm ■ Weight: 13.4 kg *Please note that there may be slight discrepancies as these measurements were taken by us. [Product Condition / Verification Details] Basic operation has been verified. The remote control cannot be used. 🇯🇵 Interested in this item? Feel free to message us for more details. 🏷️ Product Code: A-147 🛍️ More Similar Products Available 📂 Catalog Code: B-1 ———

luke.oriens
19 days ago

ronald277077025
4 months ago

eulneversee
5 months ago
Description
Beautiful Sansui Stereo Receiver Power Amp B-77 and Matching C-77 Stereo Pre Amplifier Super rare and hard to find in good working condition. Price P50,000.00 Set All original,no history of repair Product Description The Sansui C-77 and B-77 pair combines the sonic refinement of the C-77 preamplifier with the controlled power of the B-77 power amplifier. Ideal for high-fidelity enthusiasts, this set offers an extended frequency response and extremely low harmonic distortion, ensuring detailed, precise
Description
ONKYO FR-N7TX N7X CD MD Tuner Amplifier 110volts. In very good condition 2CH 46W 4Ω to 16Ω Quality Hi-Fi output with Sub Pre-out See Actual Dimension/Measurement in the Photo Unit Body only. No Remote. No Transformer included. Condition/Issue: MD considered Defective (stock-up due to mechanical failure, repairable) CD sometimes works sometimes it doesn't. Selling as is. AUX and all other functions are working properly. · TONE adjustment ··· Yes · BASS adjustment ··· Yes · Heavy bass enh
Description
⚠️110volts from Japan 🇯🇵⚠️ ▪️Type Stereo pre-main amplifier ▪️Maximum practical power 90W + 90W (4 ohm, EIAJ) ▪️Rated output (Both channel drive, 20 Hz to 20 kHz) 50W + 50W (6 Ω, 0.03%) 40W + 40W (8 Ω, 0.01%) ▪️Input Sensitivity / Impedance Phono MM : 2.5mV/50k Ω ▪️CD, Tuner, Line, DAT/Tape1, Tape2 : 150mV/40k Ω ▪️Phono maximum allowable input MM : 150 mV (1 kHz, 0.02%) ▪️Output Level / Impedance DAT/Tape1, Tape2, Line, Rec, Adaptor Out : 150mV/2.2k Ω ▪️Frequency characteristic Phono MM : 20 Hz to 20 kHz
Description
ARCAM FMJ C49 Preamplifier (Rare, truly audiophile gear) MAY CONSIDER TRADE-IN OR SWAP FOR STREAMER OR TURNTABLE OF MORE OR LESS SAME VALUE With one and only issue: harmless paint damage at the bottom rear, as shown, due to unnoticed and prolonged bad shelf placement. Otherwise, the unit is pristine, like new, with less than 100 hours use. Currently boxed, awaiting buyer Imported from HK official dealer just last August 2025. 1st owner Complete package --with box, remote, manual, power cord. Arca
Description
ACCUPHASE C-260 CONTROL PREAMPLIFIER A serious Accuphase classic built for listeners who appreciate precision, refinement, and long-term value. The C-260 is one of those control amplifiers that quietly elevates an entire system — clean signal path, exceptional balance, and the unmistakable smooth Accuphase character. Built in Japan with the kind of craftsmanship that made the brand legendary among audiophiles. Key Features • High-end Accuphase control preamplifier • Balanced signal transmission design
Description
1.)Adcom model GFP-555 Preamplifier (Year 1986-90) Specifications: Frequency response: 5Hz to 85kHz Total harmonic distortion: 0.003% Input sensitivity: 2.3mV (MM), 200mV (line) Signal to noise ratio: 90dB (MM), 100dB (line) Channel separation: 75dB (line) Output: 2V (Pre out) Dimensions: 432 x 289 x 76mm Weight: 5.2kg 2.)Adcom model GFA-2535 Stereo Power Amplifier Specifications: Power output: 60 watts per channel into 8Ω (stereo), 200 watts into 8Ω (mono) Frequency response: 10Hz to 20kHz Total harmonic

motable.paul
7 months ago
Description
👉restored STOCK circuit not modified unit, working condition, very nice vintage sounding amplifier, it can be use as a Pre-amplifier also or even power amplifier 👇sample demo test👇 https://youtu.be/-sR8cNEhMuM?feature=shared 👉all button & pot controll are operational 👉100volts input power 👉location: Antipolo City

aprilocampo0412
10 months ago

cebu_vintage_audio
4 years ago
Description
*220 volts, made in Japan *good working condition *52K, set of Sony amplifier, TA-3200F SPECS: Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.1% Input sensitivity: 2mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Output: 150mV (line), 30mV (DIN), 1V (Pre out) Dimensions: 15.75 x 5.875 x 12.875 inches Weight: 11 kg
Description
SONY DIGITAL PROCESSING AV AMPLIFIER TA-AV850D PRE-MAIN AMPLIFIER 100 WATTS (FRONT ) 100 WATTS (DUAL CENTER) 50 WATTS (REAR) BASS-MID-HIGH GRAPHIC EQUALIZER HIGH RESOLUTION SOUNDFIELD DOLBY PROLOGIC 9 SURROUND MODES MADE IN JAPAN 110 VOLTS DIMENSIONS: W47 x H15 x D40. 5 cm Side wood removal W43 cm 14.8 kg Location: Sta Maria Bulacan Shipping at buyers expense
Description
- Onkyo PR-RZ5100 AV pre Amplifier - 11.2 channel processing - 4k up scaling - Features a display screen and front panel controls - Includes a headphone jack - Supports DTS:X audio - Designed for multi-speaker home theater setups Key Features - Audio Formats: Decodes Dolby Atmos, DTS:X, supports 11.2 MHz DSD, 192/24 PCM, and hi-res FLAC/WAV. - Video Processing: 4K/60Hz (4:4:4), HDR10, Dolby Vision pass-through, HDCP 2.2, and 4K upscaling. - Connectivity: 11.2 balanced XLR & unbalanced RCA pre-o















